thin metal Archives | Arnold Magnetic Technologies

Thin Metals in Battery Technology Tech Talk

Arnold Communications — Tue, 26 Apr 2022 17:30:00 +0000

Arnold Presents: Thin Metals in Battery Technology Tech Talk

Electricity is the fuel of tomorrow, a future powered by battery technology. With the global electric mobility market expected to reach nearly $500 billion by 2025, battery and power storage needs will be pushed beyond current limits. Design teams are being challenged to rethink how systems work on the ground, in the skies, and at sea.

Presented by Battery & Electrification Technology magazine and SAE International, the online Battery & Electrification Summit offers two days of expert insight, innovation, and emerging applications for design engineers and managers. Covering evolving battery advancements and requirements across the automotive, commercial vehicle, aerospace, and defense sectors, the Summit will help you successfully navigate and succeed in this rapidly evolving market.

One FREE registration gives you access to all of the on-demand sessions from the event.

Thin Metals in Battery Technology

This presentation will review some of the thin metals technologies used in battery topology and construction. Watch the on-demand Tech Talk using the link below.

Watch On-Demand

The post Thin Metals in Battery Technology Tech Talk appeared first on Arnold Magnetic Technologies.

Thin Metals in Battery Technology Tech Talk

Arnold Communications — Tue, 26 Apr 2022 17:30:00 +0000

Watch On-Demand

Arnold Presents: Thin Metals in Battery Technology Tech Talk

One FREE registration gives you access to all of the on-demand sessions from the event.

Thin Metals in Battery Technology

This presentation will review some of the thin metals technologies used in battery topology and construction. Watch the on-demand Tech Talk using the link below.

Watch On-Demand

The post Thin Metals in Battery Technology Tech Talk appeared first on Arnold Magnetic Technologies.

Improved Testing of Molypermalloy and other High Frequency Materials

Arnold Communications — Thu, 11 Oct 2018 15:02:00 +0000

At Precision Thin Metals,

a Division of Arnold Magnetic Technologies.

At Arnold, we like demanding applications and we’re always up for a good challenge! Fortunately, our customers have obliged and provided a number of new applications for our materials. In order to better predict material performance in these applications, we have updated and extended our testing capabilities.

This year we have added a new electrical steel test system that can measure iron losses up to 20kHz. The system will also allow us to characterize performance on standard Epstein Frames, Torroids, and Single Epstein Strips.

The setup is excellent at testing electrical steels up to 20kHz, but we also have a number of applications that operate at much higher frequencies. For these applications, we have commissioned the construction of a High Frequency Response Tester.

The High Frequency Tester will give us Real and Imaginary permeability results from 1MHz – 2.5GHz.

For customers interested in materials such as our Molypermalloy, the High Frequency Tester will allow us to adjust the material’s response by altering our processing conditions. The output of the High Frequency Tester (shown below) will indicate how the Molypermalloy will perform at different frequencies.

Amorphous Materials such as the Molypermalloy can also be tested with the Amorphous Strip Tester. This will give us performance data from zero to 20kHz which we can then couple with the High Frequency Tester’s 1MHz-2.5GHz results. These capabilities still leave an analysis gap from 20kHz to 1MHz, but we’re currently working on new techniques to help fill this gap.

Click for more about Nickel Irons & Soft Magnetics.

The post Improved Testing of Molypermalloy and other High Frequency Materials appeared first on Arnold Magnetic Technologies.